Flexible working hours: visit by appointment only. Saturday & Sunday closed.
© 2023 HI-TECH
With its striking front, the Midi-Tower Nimbus from Kolink stands out clearly. An RGB LED strip surrounds a large recess in the front, which significantly increases the airflow of the housing. The well-cooled hardware inside the case can be admired through the tempered glass side panel. Despite the solid side panel, the Kolink Nimbus only weighs 4.58 kilograms. The housing, which is designed for good airflow, can accommodate motherboards up to an ATX form factor, graphics cards can be up to 325 mm long - enough space for powerful gaming hardware.
Tempered glass side panel & a pre-installed fan
The solid chassis consists of one millimeter thick SECC steel and is equipped with a four millimeter thick tempered glass side part and a front made of plastic with an aluminum look. A huge recess, surrounded by a digitally addressable RGB LED strip, ensures an optimized airflow, the magnetic dust filter behind it keeps the inside of the housing clean.
The entire interior is coated in black and provided with a power supply cover to achieve a particularly clean look. There is space for a permanently installed hard drive cage with brackets for two 3.5 or 2.5 inch drives and the power supply. There are two additional slots for 2.5-inch drives on the back of the mainboard tray.
Dust filters keep the Kolink Nimbus clean
In order to ensure ventilation of the hardware installed in the housing, one of six possible 120 mm fans, also in black, is already included in the housing and installed on the back. On the front, a total of three 120 mm fans have space under the lid, and two further 120 mm fans can be installed. Two 140 mm fans can also be installed at the front.
A 240 mm radiator can be placed in the front and on the lid of the Castle housing. The mainboard tray and the cover of the power supply offer numerous openings for sophisticated cable management. Vents with fine dust filters are located in the lid and on the underside of the housing. They are magnetic and reinforced with a delicate honeycomb pattern.
Graphics cards can be up to 32.5 centimeters long and CPU coolers up to 16 centimeters high. In addition, the I / O panel placed on the front has a USB 3.0 Type-A port in addition to two USB 2.0 ports. There is also a switch for controlling the RGB lighting.
The features of the Kolink Nimbus Midi-Tower at a glance
Designer case in black for mainboards up to ATX
Large inlet on the front with RGB-LED border for optimal airflow
Magnetic dust filters on the front, lid and bottom
Side part made of 4 mm thick tempered glass
1x pre-installed 120 mm fan, 6 in total possible
I / O panel with 2x USB 2.0 / 1x USB 3.0 & HD audio in / out, RGB LED control
Support for radiators up to 240 mm in front and on the lid
2x 3.5 / 2.5-inch data carrier slots, 2x slots for 2.5-inch drives on the mainboard tray
Graphics cards up to 32.5 cm long & CPU cooler up to 16 cm high.
Note: The rear case fan is not illuminated on motherboards of the MSI A320M and H310M series.
INTEL Core i5-13600, clock frequency @ 5.0 GHz, cores 14 (6+8), threads 20 (12+8), turbo clock 5.00GHz (Turbo Boost 2.0), 5.00GHz (P-Core), 3.70GHz (E -Core), base clock 2.70GHz (P-Core), 2.00GHz (E-Core), TDP 65W (Processor Base Power), 154W (Maximum Turbo Power), Socket Intel 1700 (LGA1700), "Socket V", codename Raptor Lake-S, Golden Cove architecture, L2 cache 11.5MB (6x 1.25MB + 8x 512kB) L3 cache 24MB, memory controller Dual Channel DDR5-4800 (PC5-38400), DDR4-3200 (PC4-25600), 76.8GB/ s, max. 128GB, ECC support yes, SMT yes, CPU functions AES-NI, AVX, AVX2, Boot Guard, CET, DL Boost, EIST, GNA 3.0, ISM, Idle States, Instruction Set 64bit (Intel 64 ), MBEC, OS Guard, SSE4.1, SSE4.2, Secure Key, Speed Shift, TXT, Thermal Monitoring, Thread Director, VMD, VT-d, VT-rp, VT-x, VT-x EPT, XD Bit , PCIe lanes 16x PCIe 5.0, 4x PCIe 4.0 chipset interface DMI 4.0, 16GT/s (PCIe 4.0 x8).
In addition to higher clock speeds and the number of cores, Intel provides its 13th generation desktop CPUs with additional L3 cache for the E-cores, which according to the manufacturer benefits the execution of larger data sets and better performance, and with more L2 cache per P-Core and E-Core cluster. Here, Intel promises to minimize the time spent exchanging data between the caches and the memory, which speeds up the workflow. There is an additional 2 MiByte L2 cache per P core and 4 MiByte L2 cache per E core cluster.
Intel's powerful hybrid architecture integrates two core families into a single CPU, ensuring everything in your gaming universe runs smoothly. Six performance cores (P-Cores) are designed for performance on single and light-threaded workloads, accelerating gaming and productive work.
Eight efficient cores (E-Cores) are optimized for multithreading performance and minimize performance hits by secondary tasks. The Intel Thread Director prioritizes and manages CPU utilization. It distributes tasks to the most appropriate core to do the computation. Both core types can be overclocked separately.
Top performance for gamers and creators
The Raptor Lake processor architecture supports PCI-Express 5.0 and DDR5 memory. An excellent foundation for high-performance components such as NVMe SSDs and graphics cards that benefit from higher bandwidths and faster data exchange. Connectivity is also top-notch, with Thunderbolt 4 and Wi-Fi 6/6E (Gig+) support for fast transfer speeds and connections to peripherals.
JONSBO CR-2000 GT, tower cooler design, dimensions with fan (WxHxD), 120x159x134mm, fan 2x 120x120x25mm, 700-1500rpm, 43.32-106.7m³/h, 18.1-29.5dB(A), weight with fan 900g, connection 4-pin PWM, 3-pin ARGB (+5V/DATA/GND), Socket 775, 1150/1151/1155/1156/1200/1700, AM2/AM2+/AM3/AM3+, AM4, AM5, RGB lighting, special features 6 heat pipes, heat pipe direct touch, dual tower.
The Jonsbo CR-2000 GT is suitable for cooling powerful processors. The quiet 120 mm PWM fans with ARGB lighting ensure high cooling potential and a stylish design.
The features of the Jonsbo CR-2000 GT CPU cooler at a glance:
Black and silver dual tower cooler from Jonsbo
Two 120mm PWM fans
Top cover and fan with ARGB lighting (3-pin RGB (5VDG, 5V)
With RGB controller
Six 6mm copper heatpipes for fast heat dissipation
High compatibility with AMD and Intel
TDP of 200 watts
The features of the Jonsbo CR-2000 GT CPU cooler in detail
Jonsbo describes the largest cooler in the series as the CR 2000 GT. The model lets its six heat pipes end in two fin towers and is equipped with two 120 mm fans (700 to 1,500 rpm), which generate a very low background noise of a maximum of 29.5 db(A) with a displacement of 106, 7 m³/h and ARGB LEDs. An ARGB controller is included. The CR 2000 GT is the only cooler in the series that can also be installed from the front of the mainboard.
The dual-tower cooler offers integrated ARGB lighting on the top cover and on the 120 fans. The lighting can be controlled via a suitable mainboard. The Jonsbo CR-2000 GT is compatible with many popular AMD and Intel sockets.
ASUS Prime B660M-A WIFI D4, Intel 1700 socket, Intel B660 chipset, RAM 4x DDR4 DIMM, dual PC4-42666U/DDR4-5333 (OC), max. 128GB, expansion slots 1x PCIe 4.0 x16, 2x PCIe 3.0 x16 (1x x4, 1x x1), 2x M.2/M-Key (PCIe 4.0 x4, 2280/2260/2242), external connections 2x HDMI 2.1 (iGPU), 1x DisplayPort 1.4 (iGPU), 2x USB-A 3.1 (10Gb/s, B660), 4x USB-A 2.0 (480Mb/s), 1x Gb LAN (Intel I219-V), 3x jack, 1x PS/2 combo, header cooling 2x CPU fan 4-pin , 2x fans 4-pin Header lighting 1x 4-pin RGB (+12V/G/R/B, max. 3A), 3x 3-pin ARGB (+5V/DATA/GND, max. 3A, ASUS Gen2), audio 7.1 , Wireless Wi-Fi 6 (WLAN 802.11a/b/g/n/ac/ax, 2x2, Intel), Bluetooth 5.2, RAID level 0/1/5/10, audio features +solid capacitors, 1x M.2 passive cooler, onboard TPM 2.0 support (Intel PTT).
The ASUS Prime B660M-A D4 is a Micro-ATX motherboard with the Intel B660 chipset and the LGA 1700 socket. The motherboard is suitable for desktop processors of the 12th generation Intel Core CPUs, Alder Lake. It supports DDR4 memory with up to 5,333 MHz and supports features such as WLAN ax and Bluetooth 5.2.
The overall performance of the ASUS Prime B660M-A WIFI D4 is impressive across the board and gives no cause for criticism. Instead of flaunting lavish equipment, the ASUS Prime B660M-A WIFI D4 concentrates on the essentials: A reliable circuit board with equipment that is absolutely sufficient for the majority.
The square PCB not only features the LGA1700 socket for Intel's Alder Lake S processors and the four DDR4 UDIMM memory banks for up to 128 GB RAM, but also a 1x PCIe 4.0 x16 slot for expansion cards. A total of two M.2 M-Key interfaces with a PCIe 4.0 x4 connection were positioned in the gaps. In addition, there are four SATA 6GBit/s. ASUS specifies a maximum clock of 5,333 MHz for the RAM slots.
KFA2 GeForce RTX 3060 (1-Click OC), 12GB GDDR6, connections 1x HDMI 2.1, 3x DisplayPort 1.4a, chip GA106-300-A1 "Ampere", 28SM, 276mm², chip clock 1320MHz, Boost: 1792MHz (OC Mode) memory 12GB GDDR6, 1875MHz, 15Gbps (15000MHz effective), 192bit, 360GB / s, shader units / TMUs / ROPs 3584/112/64, cooling 2x axial fans (90mm), special features real-time ray tracing, ray tracing cores (28), tensor cores (112), NVIDIA G-Sync, NVIDIA VR-Ready, AV1 decode, HDCP 2.3, 0dB zero fan mode, backplate, boost clock overclocked (+ 15MHz), interface PCIe 4.0 x16, computing power 12.85 TFLOPS (FP32), 201 GFLOPS (FP64), DirectX 12 Ultimate (12_2) OpenGL 4.6 OpenCL 3.0 Vulkan 1.2 Shader Model 6.6.
This card is a safe bet, especially at lower resolutions up to WQHD, even if the lag to the GeForce RTX 3060 Ti is a bit more pronounced than expected. In some situations you will have to lift one or the other quality regulator in WQHD, but only if you need extremely high FPS numbers and the game does not support DLSS 2.0. It only gets a bit tighter in higher resolutions, but NVIDIA doesn't advertise the card for the high resolutions either.
DLSS in particular has never been as valuable for this combat dwarf as it is today, because if you focus more on performance and dampen the other settings a bit and do without the DXR effects completely, you can even use Ultra HD in the appropriate games swim with the river. Otherwise, DLSS also allows DXR in Full HD, which was probably the intention.
The GeForce RTX 3060 is an inexpensive 1440p gaming card and it fulfills this requirement with flying colors. Even current titles are displayed with sufficient FPS (of course, depending on the selected resolution). If you need 144 Hz in FullHD, you will also be happy with a GeForce RTX 3060 in most games.
FSP Hydro K Pro 750W ATX 2.52, fan 120mm, fixed cable management, connectors 2x 4/8-pin ATX12V, 4x 6/8-pin PCIe, 8x SATA, 2x IDE, 1x floppy, 1x 24-pin Average efficiency 88%, certificates 80 PLUS Bronze (manufacturer, 230V EU), +3.3V 20A +5V 20A +12V 62.5A -12V 0.3A +5Vsb 2.5A Number of 12V rails 1, PFC active, specification ATX 2.52, special features ErP Lot 6, supports Haswell C6/C7 low-power states, color black.
The new Hydro K PRO PSUs comply fully ATX12 v2.52 standard and the latest safety 62368 regulation as well and comes with high-grade ribbon cables, give your PC a polished look. The Hydro K PRO series is designed as a powerful single +12V rail that continually delivers maximum performance for the most demanding graphic cards, while FSP’s custom DC-DC design provides safety and power efficiency. Besides, with an 230V 80 Plus® rating, delivers over 88% high efficiency and low noise levels thanks to its hydraulic bearing fan design, where a large 120mm fan takes care of cooling duties when required, making it excellent for situations that are sensitive to size and noise.
Latest CPU ready
Global safety approved
Active PFC ≥ 0.9
High efficiency ≧ 88%
Powerful +12V single rail design
Hold up time ≥ 17ms @ 80% load
Double layer EMI filter
120mm hydraulic bearing (HYB) fan
+5V & 3.3V DC to DC module design
All black cables
Complete protections: OCP/OVP/OPP/SCP
MEGA Electronics Fastro MS150 SSD 1TB, Solid State Module (SSM) design, form factor M.2 2280, interface M.2/M-Key (PCIe 3.0 x4), reading 2400MB/s, writing 3200MB/s SLC-Cached, IOPS 4K read/write 240k/250k, memory modules 3D-NAND TLC, TBW 1.2PB, reliability forecast 1.5 million hours (MTBF), controller Silicon Motion SM2263XT, 4 channels, cache 2GB (DDR4), SLC cache, protocol NVMe 1.3, Power consumption 6W maximum.
Fastro MS150 SSD is a large storage solution that offers read/write speeds of up to 2,400MB/s / 3,200MB/s. That's 6 to 8 times faster than a SATA-based SSD and even 50 times faster than a traditional hard drive. The SSD works with high performance, lower heat and faster loading time. The efficient performance and the M.2 2280 design make the MS150 SSD ideal for slim notebooks and systems with limited space.
NVMe is leading the new standard for SSDs, and NVMe SSDs are designed to provide a range of storage solutions that are ideal for new PC builds, laptops/notebooks, and storage system upgrades. Improved systems and higher PC performance also mean better performance in software and applications such as 3D rendering, gaming and media creation.
TOSHIBA Harddisk 1TB, SATA 6Gb/s, Form factor: 3.5" • Drive: 7200rpm • Cache: 64MB • Power consumption: 6.4W (working), 2.2W (idle) • Volume: 26dB(A) (working), 25dB(A) (idle) • Specials: 4KB Sectors with Emulation.
The DT Desktop hard disk drive series provides 1TB capacity and features an innovative technology to deliver a greater level of power efficiency and quiet operation for energy-conscious, environmentally-friendly computers. With low power, high capacity and cool operation, these 3.5-inch (8.9 cm) drives offer a rotation speed of up to 5940 rpm and an interface transfer rate of 6 Gb/s. In addition, the DT Series uses Advanced Format technology to provide maximum error detection and more efficient use of the storage surface area.
No optical disc drive in the system!
2 x USB 3.2 Gen 2 ports (2 x Type-A )
4 x USB 2.0 ports (4 x Type-A)
1 x DisplayPort
2 x HDMI® ports
1 x Wi-Fi Module
1 x Intel® 1Gb Ethernet port
3 x Audio jacks
1 x PS/2 Keyboard/Mouse combo port
Monitor connections can be found in the detailed description of “GRAPHIC CARD(S)”
Front ports of the PC / Cases can be found in the detailed description of “CASE“
Integrated WLAN. For more information click "Motherboard" or "Interfaces" !
The ultimate pleasure for your ears thanks to Creative Sound Blaster Cinema.
MSI, the world's leader in motherboards and graphics cards has chosen Creative Sound Blaster Cinema audio technology for its new motherboard lineup. Sound Blaster is the leading brand in PC gaming audio and MSI is excited about the prospect of providing class-leading audio technology with its motherboards. Thanks to the Sound Blaster Cinema suite of audio technologies, gamers can enjoy upgraded surround sound through their stereo headphones, enhanced gaming sound effects and Smart Volume control for long gaming sessions.
When using Sound Blaster Cinema, gamers will be able to hear their opponents more clearly and easily while enjoying the competitive advantage of accurate positional audio to reveal the precise location of their opponents.
Sound Blaster Cinema
Armed with the technology of the biggest name in PC gaming audio, gamers can leverage Sound Blaster Cinema to get the best sound enhancements for today's games powered by Sound Blaster SBX Pro Studio technology. Each of the five technologies of SBX Pro Studio is focused on delivering a more immersive gaming experience:
-SBX Bass - SBX Bass technology dramatically improves the sound experience by expanding the low frequency tones
-SBX Crystalizer - Ensures that every audio detail is heard by restoring the "highs" and "lows" that are compromised with audio compression
-SBX Dialog Plus - SBX Dialog Plus intelligently enhances voices in games and moves for dramatically clearer dialog
-SBX Surround - Goes beyond 7.1 surround sound creating unprecedented levels of audio realism including stunning surround effects that produce virtual speakers around, above and below you
-SBX Smart Volume - Address the problem of abrupt volume level changes in games by intelligently applying gain and attenuation to deliver consistent volume levels
Microsoft Windows 10 Professional 64Bit, pre-installed with all necessary device drivers. Switch on and get started!
The launch of Windows 10 and the associated developments are among the most important market launches in Microsoft's corporate history. Windows 10 not only brings a new version of the operating system onto the market, Windows 10 enables a new platform generation:
"We want to ensure that we offer developers the largest and most vibrant user base for their applications," said Satya Nadella in his opening keynote at BUILD 2015 in San Francisco. Windows 10 is now available in 190 countries and 111 languages.
The browser is really new in Windows 10: Edge replaces Internet Explorer. The new browser doesn't just have the cooler name. It is also much faster. In almost all browser benchmarks, Edge depends on IE 11 from Windows 8.1. It can almost double its pace in Mozilla's Kraken benchmark. It looks the same in Google's Octane 2.0 test. Its pace remains roughly the same in the Sunspider test and the Peacekeeper benchmark. Conclusion: When it comes to the browser speed, Windows 10 with Edge catches up a lot. In Kraken and Octane, Edge overtakes the competition, in the Sunspider he stays ahead. The old conditions are only preserved in the Peacekeeper test.
Microsoft already shortened the start times of Windows extremely with Windows 8. If the computer is switched off using "Shut down", it does not switch itself off, but only goes into hibernation - from which it can wake up more quickly. Even with a real Katlstart or restart, Windows 8.1 is slightly slower: However, over time, Windows remembers the files that it needs for the start: The start time is shortened with repeated starts. After ten starts, the two operating systems were almost on par with 20 seconds (Windows 10) and 22 seconds (Windows 8.1).
Windows is actually getting faster and faster the older it gets: For most components, manufacturers are releasing ever more up-to-date drivers that accelerate the hardware. Windows feels like it is getting slower and slower: This is mostly due to the fact that the autostart folder is filling up with more and more entries, more and more tools are running in the background and more and more programs that are no longer used are littering the memory. The performance tests show hardly any difference between Windows 8.1 and Windows 10. Sometimes one system is faster, sometimes the other. But all the results are so closely related - with less than three percent difference - that no difference is noticeable in practice. This also applies to tests such as Cinebench R15, which primarily check the processor performance. Even if we repeated the tests several times, nothing changed: When saving and buffering frequently used files, nothing seems to have changed between Windows 8.1 and 10. Conclusion: When it comes to hardware performance, Windows 10 is as fast as Windows 8.1 - or vice versa. So that Windows 10 stays fast, the same rules apply as always with Windows: Install the latest drivers and keep the system clean.
Windows 10 comes with the new Direct X12 3D interface. DX12 is designed to allow game programmers to use the capabilities of the GPU more efficiently. Computers with less powerful graphics cards can also benefit from this and display graphically complex games more smoothly. At the moment, the potential of DX12 can only be demonstrated using synthetic benchmarks such as the API overhead test. Conclusion: Windows 10 has the potential to accelerate games on weaker systems thanks to the DX12. But the concrete results will only show games that use DX12. The first should appear at the end of the year.
Windows 10 lays a good foundation: the hardware manufacturers have to use this to tease out a performance plus with improved drivers. Or in the case of Direct X12 game programmers who use the capabilities of the new interface in games.
HI-TECH anti-cucumber guarantee (already included in full when purchasing a HI-TECH PC and / or notebook)
a) Complete assembling of the PC system or notebook including serial number management
b) Optimization of the cabling between the individual PC components for the purpose of optimal air flow in the system
c) Optimization and performance enhancement of various hardware components (GraKa / CPU etc.)
d) Installation of the latest BIOS updates (motherboard, GraKa)
e) Complete configuration of the BIOS settings to provide the maximum performance and reliability of the PC system + storage of the settings in order to be able to reload them later (e.g. after changing the BIOS battery)
f) free hotline
g) 24-hour long-term test for quality control of the PC components
Enjoy a Breathtaking Gaming Experience with the Systems of HI-TECH!
Our perfectly configured high performance systems offer you the power that you need to win against all your opponents. Real graphics and extreme performance lead you into new dimensions of gaming. Independent journalists attest: our PCs and notebooks are a "masterpiece" (Ingame.de) and the "antithesis of the iMac" (Profil.at)
one of the biggest game portals - tests on our high performance gaming PCs - you should also trust on this clear recommendation!
All information are provided by the manufacturer. Product images shown above may present a possible scenario and represents no liability or responsibility for incorrect or omitted entries and pictures.