Flexible working hours: visit by appointment only. Saturday & Sunday closed.
© 2023 HI-TECH
The Dawn TG is an elegant midi tower with numerous innovative features from the BitFenix case forge. Behind the coated tempered glass front is a mesh with a unique pattern that extends to the right side. The digitally addressable RGB lighting behind it emits light reminiscent of a sunrise shining through a window. The left side stripe with large air inlets ensures good airflow. The top has a large honeycomb mesh with a magnetic dust filter under which a 240 radiator has space. Alternatively, the dust filter can be replaced with a solid cover.
BitFenix includes three quiet 120 mm fans with the case. The fan on the back comes from the in-house Specter series and is equipped with RGB lighting, which bathes the interior, which can be seen through the two tempered glass side panels, in a suitable light. In addition, the case can convince with enough space even for E-ATX mainboards and space for perfect cable management. The highlight, however, is the possibility of installing the graphics card vertically, which can also be up to 380 millimeters long.
The features of the BitFenix Dawn TG Midi Tower at a glance:
Extremely stylish midi tower for mainboards up to E-ATX
Digitally addressable RGB LED lighting with front panel controller
Front and both sides made of coated tempered glass
I/O panel with 1x USB 3.1 Type C and 2x USB 3.0 & HD audio in/out & RGB switch
Support for three radiators in 360/280, 240 and 120mm format
2x 3.5/2.5 inch & 4x 2.5 inch data carrier slots
3x 120mm fans preinstalled, 1x with RGB LEDs - 7 possible in total
Graphics cards up to 38 cm in length & CPU coolers up to 16.5 cm
Stylish midi tower with exquisite RGB LED lighting and lots of tempered glass
From the outside, the case impresses with tempered glass on both sides and front.
Bitfenix has again implemented an innovation here, the tempered glass panes are provided with a protective film that is also used in the automotive industry. In the event of a break, for example, it prevents the glass from shattering and should never be removed. At the same time, the particularly clear glass remains extremely translucent and lets the RGB LED components shine through in all their glory. With a compatible mainboard, the RGB LEDs on the front, but also the lighting of the rear RGB LED fan, can be easily configured via software and synchronized with other RGB components in complex lighting effects. Alternatively, the integrated controller is available, which in turn is controlled via a switch on the I/O panel.
Inside, the spacious midi tower can accommodate mainboards from Mini-ITX to E-ATX format. Two 3.5 or 2.5 inch drives can be accommodated under the power supply cover thanks to the brackets supplied, while four additional 2.5 inch data carriers disappear behind the mainboard tray. Hardware and cooling components are presented behind the left viewing window in a particularly clean look, also thanks to the power supply cover, under which the power supply and cable clutter are invisible. Behind the mainboard tray there is 28 millimeters of space for the cables.
Plenty of space for cooling and powerful hardware in the Bitfenix Dawn TG
The case is equipped with a 120 millimeter RGB fan on the back, while two fans without lighting in the front ensure a cooling air flow. In addition, two 120 mm fans can be installed in the lid and a total of three in the front. Another can be attached to the floor behind the power supply. Two 140 millimeter models are also possible in the front or on the lid. The ventilation openings in the front, bottom and lid are all equipped with dust filters that can be removed without tools.
In the front, the Bitfenix Dawn TG can accommodate radiators in 240, even 360 or 280 millimeter format with a depth of 35 millimeters and a width of 141 millimeters. Part of the PSU shroud can be removed for large radiators. There is space for another radiator up to a size of 280 millimeters on the lid, and the pre-installed fan can be replaced with a 120 mm radiator on the back. CPU coolers can be up to 16.5 centimeters high and powerful graphics cards fit up to a length of 38 centimeters in the interior. The rear PCI bracket with seven horizontal slots can be replaced with an enclosed bracket with four vertical slots.
AMD Ryzen 7 5800X @ 4.70 GHz, Socket AM4, code name Vermeer, cores 8, threads 16, base clock 3.80 GHz, turbo clock 4.70 GHz, memory controller Dual Channel PC4-25600U (DDR4-3200), free multiplier yes, CPU functions MMX (+), SSE, SSE2, SSE3, SSE4.1, SSE4.2, SSE4A, x86-64, AMD-V, AES, AVX , AVX2, FMA3, SHA, architecture Zen 3, L2 cache 4MB (8x 512kB), L3 cache 32MB (1x 32MB), chipset interface PCIe 4.0 x4, PCIe lanes 24x PCIe 4.0 (16 + 4 + 4) Memory max. 128GB, memory bandwidth 51.2GB / s.
The purchase argument for the fastest gaming CPU was previously reserved for Intel processors. But with the new Ryzen processors of the 5000 series, this changes. The single-core performance could be increased drastically and the Intel Core i9-10900K remains around 20 percent behind the AMD Ryzen 9 5900X.
The somewhat slower Ryzen 7 5800X also has an easy time with the 10 core. Even the multi-core performance is much better with the 8-core. The success story of AMD continues with the new models of the Ryzen 5000 family and for the first time the current Ryzen CPUs are faster than Intel's Core i9-10900K when gaming. AMD does not pack even more CPU cores under the heatspreader, but fundamentally changes the structure of the CCX in order to increase the IPC. This is exactly where the new Ryzen 5000 can convince and outclass the old top dog in many single CPU benchmarks. Last but not least, the higher single-thread performance also has a significant impact on the multi-core performance.
JONSBO CR-2000 GT, tower cooler design, dimensions with fan (WxHxD), 120x159x134mm, fan 2x 120x120x25mm, 700-1500rpm, 43.32-106.7m³/h, 18.1-29.5dB(A), weight with fan 900g, connection 4-pin PWM, 3-pin ARGB (+5V/DATA/GND), Socket 775, 1150/1151/1155/1156/1200/1700, AM2/AM2+/AM3/AM3+, AM4, AM5, RGB lighting, special features 6 heat pipes, heat pipe direct touch, dual tower.
The Jonsbo CR-2000 GT is suitable for cooling powerful processors. The quiet 120 mm PWM fans with ARGB lighting ensure high cooling potential and a stylish design.
The features of the Jonsbo CR-2000 GT CPU cooler at a glance:
Black and silver dual tower cooler from Jonsbo
Two 120mm PWM fans
Top cover and fan with ARGB lighting (3-pin RGB (5VDG, 5V)
With RGB controller
Six 6mm copper heatpipes for fast heat dissipation
High compatibility with AMD and Intel
TDP of 200 watts
The features of the Jonsbo CR-2000 GT CPU cooler in detail
Jonsbo describes the largest cooler in the series as the CR 2000 GT. The model lets its six heat pipes end in two fin towers and is equipped with two 120 mm fans (700 to 1,500 rpm), which generate a very low background noise of a maximum of 29.5 db(A) with a displacement of 106, 7 m³/h and ARGB LEDs. An ARGB controller is included. The CR 2000 GT is the only cooler in the series that can also be installed from the front of the mainboard.
The dual-tower cooler offers integrated ARGB lighting on the top cover and on the 120 fans. The lighting can be controlled via a suitable mainboard. The Jonsbo CR-2000 GT is compatible with many popular AMD and Intel sockets.
ASUS Prime B550M-A WIFI II, socket AMD AM4, chipset AMD B550, RAM 4x DDR4 DIMM, dual PC4-38933U/DDR4-4866 (OC), max. 128GB, expansion slots 1x PCIe 4.0 x16, 2x PCIe 3.0 x1, 1x M.2/M key (PCIe 4.0 x4/SATA, 22110/2280/2260/2242), 1x M.2/M key (PCIe 3.0 x4/SATA, 2280/ 2260/2242) External connections 1x VGA (iGPU), 1x DVI-D (iGPU), 1x HDMI 2.1 (iGPU), 2x USB-A 3.1 (10Gb/s, B550), 4x USB-A 3.0 (5Gb/s), 1x Gb LAN (Realtek RTL8111H), 3x jack, 1x PS/2 combo, internal connections 1x USB 3.0 header (5Gb/s, 2x USB 3.0), 2x USB 2.0 header (480Mb/s, 4x USB 2.0), 4x SATA 6Gb/s (B550), 1x serial, 1x TPM header, 1x S/PDIF header, 1x speaker header, 1x COM debug header, header cooling 2x 4-pin CPU fan, 2x 4-pin fan , Audio 7.1 (Realtek ALC887), Wireless Wi-Fi 6 (WLAN 802.11a/b/g/n/ac/ax, 2x2), Bluetooth 5.2, orange lighting, 1 zone (audio signal path), Special features Audio+solid capacitors, ECC support, Onboard TPM 2.0 support.
ASUS Prime Series is expertly engineered to unleash the full potential of the AMD Ryzen 5000 Series/5000G Series/4000G Series/3000 Series platform. With a robust power design, comprehensive cooling solutions and intelligent tuning options, the Prime B550 series motherboards offer everyday users a range of performance optimization options via intuitive software and firmware functions.
Vote it your way
Comprehensive controls form the basis of the ASUS Prime series. The Prime B550 motherboard offers flexible tools that allow you to tweak every aspect of your system, allowing you to tailor performance settings to perfectly suit the way you work - maximizing your productivity.
Cool to the core
The Prime B550 Series is equipped with multiple integrated heatsinks and a range of hybrid fan headers to ensure your rig stays cool and stable under intense workloads.
VRM heatsink and thermal pads
A VRM heatsink with thermal pad underneath improves heat transfer from the MOSFETs and chokes for better cooling performance.
Build on a solid foundation
The Prime B550 motherboard provides all the essentials to boost day-to-day productivity, so your system is up and running with stable performance, intuitive cooling, and flexible transmission options.
PCIe 4.0 M.2 (up to 64Gbps)
The PCIe 4.0 M.2 slot features NVMe SSD RAID support for an incredible performance boost. Create a RAID configuration with up to PCIe 4.0 storage devices to enjoy the fastest data transfer speeds on AMD Ryzen™ 5000-series/3000-series processors.
Small things make a big difference
The Prime B550 Series adds the nuanced details that enhance every experience, from exclusive codecs that offer pristine audio quality to intuitive RGB lighting controls that allow you to customize your system to create a uniquely personal look.
KFA2 GeForce RTX 3070 Ti EX (1-Click OC), 8GB GDDR6X, connections 1x HDMI 2.1, 3x DisplayPort 1.4a, chip clock 1575MHz, boost: 1815MHz (OC mode), memory 8GB GDDR6X, 1188MHz, 19Gbps (19000MHz effective), 256bit , 608GB / s shader units / TMUs / ROPs 6144/192/96, cooling 3x axial fans (92mm) (RGB illuminated), dimensions 329x130x61mm, special features real-time ray tracing, ray tracing cores (48), tensor cores ( 192), NVIDIA G-Sync, NVIDIA VR-Ready, AV1 Decode, HDCP 2.3, 0dB zero fan mode, backplate, LED lighting (RGB), overclocked boost clock (+ 45MHz), PCIe 4.0 x16 interface, Computing power 22.3 TFLOPS (FP32), 348 GFLOPS (FP64), DirectX 12 Ultimate (12_2) OpenGL 4.6 OpenCL 3.0 Vulkan 1.2 Shader Model 6.6.
Titanium. Hardly anyone still knows that the Ti suffix goes back to the stable light metal, which is simply called "titanium" in this country. Nvidia marketing came up with this addition around 20 years ago to identify particularly potent graphics cards.
After Nvidia has ushered in the hot season with the Geforce RTX 3080 Ti, the Geforce RTX 3070 Ti follows. The Geforce RTX 3070 Ti uses the fillet pieces of GPU production: chips with the ending "400" and thus the full configuration. The new Ampere graphics card has 48 shader multiprocessors, which include 6,144 FP32 ALUs, 328 texture units, 96 raster output stages and 48 ray tracing cores.
So far, the 256-bit wide memory interface of all GA104 models was equipped with 14 GT / s fast GDDR6-without-X memory, which led to a transfer rate of 448 GByte / s. The Geforce RTX 3070 Ti, on the other hand - like the RTX 3080 (Ti) - can use GDDR6X with 19 gigatransfers per second to copy data at 608 GByte / s. That is almost 36 percent faster and therefore a significant plus.
The ratio of the most important performance parameters of the RTX 3070 Ti thus deviates quite significantly from the RTX 3070. To get all this under one roof, Nvidia specifies the Geforce RTX 3070 Ti with 290 watts TGP (board power). This corresponds to a plus of a full 32 percent compared to the RTX 3070 (220 watt TGP).
The RTX 3070 Ti achieves a good 15% higher performance than the already comfortably fast RTX 3070 and can therefore basically satisfy almost all requirements, provided that at most WQHD gaming is the desired goal. The warm feeling in the stomach area is also psychologically valuable, with the RTX 3070 Ti receiving the best, fully active GA104 chips and rapid GDDR6X memory.
FSP Fortron/Source Hydro G 850W is the world first one PSU break the rule and makes it as a standard to gamers. With three colors, it is easy to create your theme related to VGA cards.
Unique product ID with changeable side stickers for DIY enthusiasts and gamers.
The electrical performance of the Hydro G 850W PSU was very good. The unit exhibited tight voltage regulation, high efficiency (80 Plus Gold) and good AC ripple and noise suppression. The cooling fan is very quiet and the power supply operates in silent fan-less mode at low power levels. The Hydro G Series also features fully modular, flat ribbon-style cables. Our only minor complaint was the lack of a second ATX/EPS 4+4 pin cable/connector, which is pretty standard at this power level.
Intelligent fan speed control circuit design with 0dBA function
Server grade circuit and advanced thermal layout design
Complies with newest ATX12V & EPS12V standards
High efficiency ≧ 90%
Active PFC ≧ 99%
High wattages with 80PLUS® gold certification
Powerful single +12V rail design
Advanced full modular design with ribbon cables
100% Japan-made E-cap
SLI and Crossfire ready
Quiet and long-lasting 135mm FDB fan
Full protections: OCP, OVP, SCP, OPP, UVP, OTP
Global safety approved
As we get requests concerning the proper sizes of power supplies very often, we want to give you some information here, so that you can get an idea of this topic:
MEGA Electronics Fastro MS150 SSD 1TB, Solid State Module (SSM) design, form factor M.2 2280, interface M.2/M-Key (PCIe 3.0 x4), reading 2400MB/s, writing 3200MB/s SLC-Cached, IOPS 4K read/write 240k/250k, memory modules 3D-NAND TLC, TBW 1.2PB, reliability forecast 1.5 million hours (MTBF), controller Silicon Motion SM2263XT, 4 channels, cache 2GB (DDR4), SLC cache, protocol NVMe 1.3, Power consumption 6W maximum.
Fastro MS150 SSD is a large storage solution that offers read/write speeds of up to 2,400MB/s / 3,200MB/s. That's 6 to 8 times faster than a SATA-based SSD and even 50 times faster than a traditional hard drive. The SSD works with high performance, lower heat and faster loading time. The efficient performance and the M.2 2280 design make the MS150 SSD ideal for slim notebooks and systems with limited space.
NVMe is leading the new standard for SSDs, and NVMe SSDs are designed to provide a range of storage solutions that are ideal for new PC builds, laptops/notebooks, and storage system upgrades. Improved systems and higher PC performance also mean better performance in software and applications such as 3D rendering, gaming and media creation.
TOSHIBA Harddisk 1TB, SATA 6Gb/s, Form factor: 3.5" • Drive: 7200rpm • Cache: 64MB • Power consumption: 6.4W (working), 2.2W (idle) • Volume: 26dB(A) (working), 25dB(A) (idle) • Specials: 4KB Sectors with Emulation.
The DT Desktop hard disk drive series provides 1TB capacity and features an innovative technology to deliver a greater level of power efficiency and quiet operation for energy-conscious, environmentally-friendly computers. With low power, high capacity and cool operation, these 3.5-inch (8.9 cm) drives offer a rotation speed of up to 5940 rpm and an interface transfer rate of 6 Gb/s. In addition, the DT Series uses Advanced Format technology to provide maximum error detection and more efficient use of the storage surface area.
No optical disc drive in the system!
2 x USB 3.2 Gen 2 ports (2 x Type-A)
4 x USB 3.2 Gen 1 ports (4 x Type-A)
1 x D-Sub port
1 x DVI-D port
1 x HDMI® port
1 x Wi-Fi Module
1 x Realtek 1Gb Ethernet port
3 x Audio jacks
1 x PS/2 Keyboard/Mouse combo port
Monitor connections can be found in the detailed description of “GRAPHIC CARD(S)”
Front ports of the PC / Cases can be found in the detailed description of “CASE“
Integrated WLAN. For more information click "Motherboard" or "Interfaces" !
The ultimate pleasure for your ears thanks to Creative Sound Blaster Cinema.
MSI, the world's leader in motherboards and graphics cards has chosen Creative Sound Blaster Cinema audio technology for its new motherboard lineup. Sound Blaster is the leading brand in PC gaming audio and MSI is excited about the prospect of providing class-leading audio technology with its motherboards. Thanks to the Sound Blaster Cinema suite of audio technologies, gamers can enjoy upgraded surround sound through their stereo headphones, enhanced gaming sound effects and Smart Volume control for long gaming sessions.
When using Sound Blaster Cinema, gamers will be able to hear their opponents more clearly and easily while enjoying the competitive advantage of accurate positional audio to reveal the precise location of their opponents.
Sound Blaster Cinema
Armed with the technology of the biggest name in PC gaming audio, gamers can leverage Sound Blaster Cinema to get the best sound enhancements for today's games powered by Sound Blaster SBX Pro Studio technology. Each of the five technologies of SBX Pro Studio is focused on delivering a more immersive gaming experience:
-SBX Bass - SBX Bass technology dramatically improves the sound experience by expanding the low frequency tones
-SBX Crystalizer - Ensures that every audio detail is heard by restoring the "highs" and "lows" that are compromised with audio compression
-SBX Dialog Plus - SBX Dialog Plus intelligently enhances voices in games and moves for dramatically clearer dialog
-SBX Surround - Goes beyond 7.1 surround sound creating unprecedented levels of audio realism including stunning surround effects that produce virtual speakers around, above and below you
-SBX Smart Volume - Address the problem of abrupt volume level changes in games by intelligently applying gain and attenuation to deliver consistent volume levels
Microsoft Windows 10 Professional 64Bit, pre-installed with all necessary device drivers. Switch on and get started!
The launch of Windows 10 and the associated developments are among the most important market launches in Microsoft's corporate history. Windows 10 not only brings a new version of the operating system onto the market, Windows 10 enables a new platform generation:
"We want to ensure that we offer developers the largest and most vibrant user base for their applications," said Satya Nadella in his opening keynote at BUILD 2015 in San Francisco. Windows 10 is now available in 190 countries and 111 languages.
The browser is really new in Windows 10: Edge replaces Internet Explorer. The new browser doesn't just have the cooler name. It is also much faster. In almost all browser benchmarks, Edge depends on IE 11 from Windows 8.1. It can almost double its pace in Mozilla's Kraken benchmark. It looks the same in Google's Octane 2.0 test. Its pace remains roughly the same in the Sunspider test and the Peacekeeper benchmark. Conclusion: When it comes to the browser speed, Windows 10 with Edge catches up a lot. In Kraken and Octane, Edge overtakes the competition, in the Sunspider he stays ahead. The old conditions are only preserved in the Peacekeeper test.
Microsoft already shortened the start times of Windows extremely with Windows 8. If the computer is switched off using "Shut down", it does not switch itself off, but only goes into hibernation - from which it can wake up more quickly. Even with a real Katlstart or restart, Windows 8.1 is slightly slower: However, over time, Windows remembers the files that it needs for the start: The start time is shortened with repeated starts. After ten starts, the two operating systems were almost on par with 20 seconds (Windows 10) and 22 seconds (Windows 8.1).
Windows is actually getting faster and faster the older it gets: For most components, manufacturers are releasing ever more up-to-date drivers that accelerate the hardware. Windows feels like it is getting slower and slower: This is mostly due to the fact that the autostart folder is filling up with more and more entries, more and more tools are running in the background and more and more programs that are no longer used are littering the memory. The performance tests show hardly any difference between Windows 8.1 and Windows 10. Sometimes one system is faster, sometimes the other. But all the results are so closely related - with less than three percent difference - that no difference is noticeable in practice. This also applies to tests such as Cinebench R15, which primarily check the processor performance. Even if we repeated the tests several times, nothing changed: When saving and buffering frequently used files, nothing seems to have changed between Windows 8.1 and 10. Conclusion: When it comes to hardware performance, Windows 10 is as fast as Windows 8.1 - or vice versa. So that Windows 10 stays fast, the same rules apply as always with Windows: Install the latest drivers and keep the system clean.
Windows 10 comes with the new Direct X12 3D interface. DX12 is designed to allow game programmers to use the capabilities of the GPU more efficiently. Computers with less powerful graphics cards can also benefit from this and display graphically complex games more smoothly. At the moment, the potential of DX12 can only be demonstrated using synthetic benchmarks such as the API overhead test. Conclusion: Windows 10 has the potential to accelerate games on weaker systems thanks to the DX12. But the concrete results will only show games that use DX12. The first should appear at the end of the year.
Windows 10 lays a good foundation: the hardware manufacturers have to use this to tease out a performance plus with improved drivers. Or in the case of Direct X12 game programmers who use the capabilities of the new interface in games.
HI-TECH anti-cucumber guarantee (already included in full when purchasing a HI-TECH PC and / or notebook)
a) Complete assembling of the PC system or notebook including serial number management
b) Optimization of the cabling between the individual PC components for the purpose of optimal air flow in the system
c) Optimization and performance enhancement of various hardware components (GraKa / CPU etc.)
d) Installation of the latest BIOS updates (motherboard, GraKa)
e) Complete configuration of the BIOS settings to provide the maximum performance and reliability of the PC system + storage of the settings in order to be able to reload them later (e.g. after changing the BIOS battery)
f) free hotline
g) 24-hour long-term test for quality control of the PC components
Enjoy a Breathtaking Gaming Experience with the Systems of HI-TECH!
Our perfectly configured high performance systems offer you the power that you need to win against all your opponents. Real graphics and extreme performance lead you into new dimensions of gaming. Independent journalists attest: our PCs and notebooks are a "masterpiece" (Ingame.de) and the "antithesis of the iMac" (Profil.at)
one of the biggest game portals - tests on our high performance gaming PCs - you should also trust on this clear recommendation!
All information are provided by the manufacturer. Product images shown above may present a possible scenario and represents no liability or responsibility for incorrect or omitted entries and pictures.