- Graphic Card(s)
With the InWin 309, the housing specialist presents an original midi tower with an elaborately designed front and an innovative interior concept. In the front panel 144 digitally addressable RGB LEDs are embedded, whose color and brightness can be adjusted individually. The highlight, however, is the built-in microphone, which illuminates the RGB LED lighting based on the room noise.
Originally designed front with 144 addressable RGB LEDs
Large, tinted tempered glass side panel
Excellent workmanship & quality materials
Innovative interior concept with vertical power supply cover
Suitable for motherboards in the ATX, Micro ATX or Mini ITX form factor
I / O panel with 1x USB 3.1 Type C, 2x USB 3.0 and audio jacks
Integrated fan and RGB LED controls
Enough space for a strong air or water cooling
2x 3.5 "& 2x 2.5" drive slots available
Customizable RGB LED matrix with software configuration
The InWin 309 combines an extensive functionality with an original aesthetic. Particularly striking is the front with the RGB LED matrix of 144 LEDs. In addition to numerous pre-set lighting modes, the LEDs can also be configured individually. Brightness and color can be adjusted with InWin's GLOW software. In addition, a microphone is installed in the upper edge of the front cover to synchronize the lighting with the music played in the room.
The I / O panel is equipped with additional controls that allow you to adjust the brightness and color of the RGB LED lighting as well as the fan speed. The light panel on the front panel displays various menu navigation icons. The I / O panel is located on the left side of the front panel and features a modern USB 3.1-C port and two Type A USB 3.0 slots.
Design and interior concept
The InWin 309 convinces with a clear design vocabulary. The sleek design of the Midi Tower is dominated by smooth exterior surfaces, so the focus is on the LED matrix. The side frame of the front bezel has a discreet polygon design that slightly angled the front cover. A subtle base raises the case from the floor and a tinted tempered glass side panel reveals the interior of the case on the left side of the case.
The interior of the InWin 309 offers an unusual layout: The cover of the housing has a vertical power supply cover, behind which there is room for up to 200 millimeters of power supply. Up to three 2.5-inch drives can be mounted on the motherboard tray, two drive carriers are included. In addition, two 3.5-inch disks can be mounted on the back. For graphics cards a maximum length of 350 millimeters is provided.
Options for air and water cooling
The InWin 309 uses only 120-millimeter fans: three fans or a 360-mm slim radiator can be installed in the floor, a fan or 120er radiator can be found on the back and three fans or a 360-radiator on the vertical power supply cover in the lid. for fans with up to 70 mm height. Classic CPU coolers can be up to 160 millimeters high. InWin installs four 120-millimeter EGO RGB LED fans at the factory. These are equipped with milky white silicone frames, behind each of which 18 LEDs are located.
Dimensions: 238 x 500 x 553 mm (W x H x D)
Weight: approx. 13.65 kg
Material: steel, tempered glass, plastic
Form factor: ATX, Micro-ATX, Mini-ITX
3x 120 mm (top, vertical)
3x 120 mm (floor)
1x 120 mm (back)
3x 120 mm EGO AE120 (ARGB, top, vertical)
1x 120 mm EGO AE120 (ARGB, back)
Radiator mountings (instead of the fans):
1x max. 360 mm (top, vertical)
1x max. 120 mm (back)
1x max. 360 mm Slim (bottom)
Filter: bottom (removable)
2x 3.5-inch slots
2x 2.5-inch slots (3x possible)
Power supply: 1x standard ATX12V (optional)
Expansion Slots: 7
I / O panel:
1x USB 3.1 type C
2x USB 3.0
2x 3.5 mm jack (1x audio in / out)
1x LED and fan modes
2x LED and fan control
Maximum graphics card length: 350 mm
Maximum CPU cooler height: 160 mm
Maximum power supply length: 200 mm
1x InWin 309 housing
1x mag-ear headset holder (any color)
1x bag of utensils (screws, spacers, cable ties, ...)
1x QR code card
Intel Core i7-10700K, clock frequency @ 5.1GHz, socket 1200, code name Comet Lake-S, cores 8, threads 16, base clock 3.80GHz, turbo clock 5.10GHz, memory controller Dual Channel PC4-23466U (DDR4-2933), CPU features Optane Memory Support, Turbo Boost Max 3.0 (5.10GHz), Turbo Boost 2.0, vPro, SMT (Hyper-Threading), VT-x, VT-d, VT-x EPT, Intel 64, SSE4.1, SSE4.2, AVX , AVX2, Idle States, EIST, Thermal Monitoring, IPT, SIPP, AES-NI, Secure Key, SGX, OS Guard, TXT, XD Bit, Boot Guard, TDP-down (95W), TDP-down frequency (3.50GHz) , Multiplier freely selectable, L2 cache 2MB (8x 256kB), L3 cache 16MB, chipset interface DMI 3.0, 8GT / s (PCIe 3.0 x4), PCIe lanes 16x (PCIe 3.0), memory max. 128GB, memory bandwidth 45.8GB / s.
With the new Comet Lake generation, Intel is entering the tenth round of Core i processors. The most important changes to the new processors include new options for Turbo Boost Max Technology 3.0 (TBMT), i.e. the automatic overclocking of the CPUs. With the new Thermal Velocity Boost (TVB), Intel determines the two best cores of a CPU and gives them an extra boost to the maximum boost clock. In other words, Intel simply tickles more performance from the CPUs through improved boost rates and higher clock rates.
The Core i7-10700K has eight cores and 16 threads and now offers Hyper-Threading again compared to the Core i7-9700K of the previous generation. In principle, the Core i7-10700K is now what the Core i9-9900K was before.
Once again, Intel means more evolution than revolution. Intel has made a few improvements here and there that also lead to more performance, but these do not relate to the architecture of the CPU, but to all other aspects that affect performance. In particular, the increase in the TDP to 125 watts and the improvement in the cooling of the CPUs are worth mentioning. In the end, these two points enable more boost, thus more clock and therefore more performance.
ENERMAX Liqmax III, internal (closed system), heatsink for CPU, heatsink material copper, compatibility CPU 775, 1150, 1151, 1155, 1156, 1366, 2011, 2011-3, 2066, AM2, AM2 +, AM3, AM3 +, AM4, FM1 , FM2, FM2 +, radiator size 240mm, radiator thickness 27mm, radiator material aluminum, fan 2x 120mm, 500-1600rpm, 14-27 dB (A), LED (RGB), LED control
The LIQMAX III RGB all-in-one CPU water cooler with RGB lighting.
The water block in acrylic optics is equipped in the Aurabelt design, which provides brilliant light effects. LIQMAX III RGB supports RGB synchronization with motherboards that have 4-pin RGB connectors (+ 12V / G / R / B). Thanks to the dual chamber design patented by ENERMAX, the Central Coolant Inlet (CCI) and the Shunt Channel Technology (SCT), the cooler achieves faster heat transfer and a longer service life. The RGB fans with dual-convex fan blades are optimized for radiators and generate high static pressure to force the heat out of the cooling fins. The LIQMAX III RGB is an excellent cooler for housings that do not want to do without RGB lighting.
The cooler is very well made and, for fans of light games, has smartly illuminated fans and a discreetly illuminated pump unit. In addition, the lighting is compatible with all common mainboards with a corresponding mainboard header.
MSI MPG Z490 Gaming Edge WiFi, form factor ATX, chipset Intel Z490, RAM 4x DDR4 DIMM, dual PC4-38400U / DDR4-4800 (OC), max. 128GB, expansion slots 2x PCIe 3.0 x16, 2x PCIe 3.0 x1, 1x M.2 / M-Key, 1x M.2 / M-Key (PCIe 3.0 x4 / SATA, 2280/2260/2242), connections external 1x HDMI 1.4b, 1x DisplayPort 1.2, 1x USB-C 3.2, 1x USB-A 3.1, 4x USB-A 3.0, 2x USB-A 2.0, 1x 2.5GBase-T, 5x jack, 1x Toslink, 1x PS / 2 combos, internal connections 1x USB-C 3.0 Key-A header, 1x USB 3.0 header (2x USB 3.0), 2x USB 2.0 header (4x USB 2.0), 6x SATA 6Gb / s, 1x TPM header, 1x Thunderbolt header 5-pin, 1x RTD3 header, cooling header 1x CPU fan 4-pin, 6x fan 4-pin, 1x pump 4-pin, header lighting 2x RGB header 4-pin, 2x RGB header 3-pin, buttons / Switches LED switch (internal), audio 7.1, RAID level 0/1/5/10, multi-GPU AMD 2-way CrossFireX, power connections 1x 24-pin, TX, 1x 8-pin EPS12V, 1x 4-pin ATX12V, lighting RGB, 1 zone (chipset cooler). Special features audio + solid capacitors, diagnostic LED, I / O panel integrated, 1x M.2 passive cooler, Bluetooth 5.1 + WLAN 802.11a / b / g / n / ac / ax.
The MSI MPG Z490 Gaming Edge WiFi is equipped with the high-end chipset for the Intel Core processors of the 10th generation and allows manual overclocking of CPUs with a free multiplier. Since the "Comet Lake-S" processors require a new socket due to the optimized power supply, the Intel socket LGA1200 is used on the 400 series mainboards. Despite the increased number of pins, the actual size of the socket remains the same with older sockets, so that CPU coolers for socket LGA 115x can also be mounted on the mainboard.
The features of the MSI MPG Z490 Gaming Edge WiFi motherboard at a glance:
2x PCIe (3.0) x16 and 2x PCIe (3.0) x1
1x USB 3.2 Gen. 2x2 with fast 20 Gbit / s & 1x USB 3.1 type A
A total of 2x USB 3.0 and 6x USB 2.0 (internal & external)
2x M.2 (PCIe 3.0 x4) / 6x SATA 6G
Supports max. 128 GB DDR4 RAM up to 4,800 MHz
Integrated RGB LED lighting with RGB LED headers
With integrated WiFi and Bluetooth module
Fast 2.5 Gbit LAN
The MSI MPG Z490 Gaming Edge WiFi in detail
The MSI MPG Z490 Gaming Edge WiFi is a motherboard in the ATX form factor and offers two PCIe-x16 slots, one of which is connected directly to the CPU and one to the chipset, as well as two PCIe-x1 slots for plug-in and expansion cards . As a high-end motherboard, the MSI MPG Z490 Gaming Edge WiFi also supports multi-GPU setups via AMD Crossfire / XDMA.
Other features of the mainboard also include a striking cooler design and integrated RGB LED lighting. Additional RGB LED components can be connected and controlled via two 4-pin RGB headers (12V) and two digitally addressable 3-pin RGB headers (5V), provided they are compatible with the RGB software of the mainboard.
RAM and drives
Up to 128 GB DDR4 RAM in dual-channel mode can be used in the four DIMM slots. The Z490 chipset supports clock rates up to 2,933 MHz, but the OC enables the MSI MPG Z490 Gaming Edge WiFi to operate RAM kits with up to 4,800 MHz!
Two M.2 slots and six SATA 6G connectors are available for storage drives. The M.2 slots support the NVMe protocol, which enables data transfer rates of just under 4 GB / s. This means that M.2 PCIe SSDs are up to eight times faster than SATA 6G SSDs!
The MSI MPG Z490 Gaming Edge WiFi has a USB 3.2 port on the I / O panel. The socket of the same design as USB-C is particularly thin and plugs can be inserted on both sides. USB 3.2 gen. 2x2 achieves very high transmission speeds of up to 20 Gbit / s. br>
In addition to a USB 3.1 port and four USB 3.0 type A ports, the board also offers two USB 2.0 ports and a classic PS / 2 port for mouse or keyboard. In addition, an HDMI and a display port connection are provided as signal outputs for the integrated graphics unit of the processor. The MSI MPG Z490 Gaming Edge WiFi offers fast 2.5 Gigabit LAN (Realtek 8125B) as well as WLAN 802.11ax and Bluetooth 5.1 (Intel AX201).
When it comes to audio, the manufacturer relies on the Realtek ALC1200 audio codec. This provides a total of five 3.5 millimeter jack sockets and an optical S / PDIF output on the I / O panel and supports 7.1 surround sound. Internally, the mainboard provides a large selection of connections and headers.
The MSI MPG Z490 Gaming Edge WiFi offers a total of eight 4-pin PWM connections for fans and / or pumps on the main board. For the power supply, there is a 24-pin ATX connector as well as an 8-pin and a 4-pin connector on the mainboard. Overclockers are also pleased about the extensive power supply with 12 + 1 + 1 phases, which is equipped with large-area heat sinks.
G.Skill RipJaws V black DIMM Kit 32GB, DDR4-3200, CL16-18-18-38, Typ DDR4 DIMM 288-Pin, Module 2x 16GB, JEDEC PC4-25600U, CAS Latency CL16 ( ~10.00ns), Row-to-Column Delay tRCD18 ( ~11.25ns), Row Precharge Time tRP18 ( ~11.25ns), Active-to-Precharge Time tRAS38 ( ~23.75ns), 1.35V, Heatspreader, Intel XMP 2.0, Sensor.
As the latest addition to the classic Ripjaws family, Ripjaws V series is the newest dual-channel DDR4 memory designed for maximum compatibility and cutting-edge performance with the latest Intel Core processors. Built with the finest components, tested under the most rigorous conditions, and offered in five color options, Ripjaws V is the perfect choice for building a new performance system or for a simple memory upgrade.
Available in a wide range of frequency options from standard DDR4-2133MHz to a blistering DDR4-4000MHz, Ripjaws V lets you enjoy a faster computing experience for gaming, video & image editing, rendering, and data processing. Each and every Ripjaws V DDR4 memory kit is tested with G.SKILL’s rigorous validation process on all major performance motherboard brands to ensure the best-in-class reliability and compatibility across the widest selection of motherboards.
Continuing the tradition of aftermarket CPU cooler compatibility, Ripjaws V is designed with a 42mm module height suitable for most oversized CPU heatsinks.
Designed with a low voltage of 1.2V~1.35V at DDR4 standard, this lowers the memory voltage requirement by 20% from DDR3 memory kits! Now your system can perform even faster without becoming an expensive appliance heater.
But that's not enough: The memory modules are illuminated with a RGB memory cover for DDR4 memory modules. A total of 36 addressable LEDs with 16.8 million colors controlled by the patented TT RGB PLUS software and / or synchronized with MSI's motherboard RGB software.
The all-new KFA2 Serious Gaming Edition has equipped with 1-Clip Booster, which can be installed at the back plate and it is the precision and quality that win. When the fan is at the back the PCB is in fact much shorter than the cooler and the key is to allow air to flow as easy as they could, therefore KFA2 built larger holes that allows air to flow through to fulfill the first requirement.
Apart from that, the advantage of adding a fan on the back plate, the 1-Clip booster fan design sucks the air out instead of blowing the air in, creating a technically-correct push-pull cooling effects. When this additional fan is used, it can achieve better performance as if a GPU running with a normal back plate.
GPU Engine Specs:
CUDA Cores 5888
Boost Clock (MHz) 1725
1-Click OC Clock (MHz) 1740 (by installing Xtreme Tuner Plus Software and using 1-Click OC)
Memory Speed 14 Gbps
Standard Memory Config 8GB
Memory Interface Width 256-bit GDDR6
Memory Bandwidth (GB/sec) 448
Windows 10 64-bit, Linux 64-bit
3 x 92mm
Fan stop @ Idle (All Fan)
DisplayPort 1.4a x 3, HDMI 2.1
FSP Fortron/Source Hyper 700W Netzteil, ATX 2.31, Fan: 120mm low noise, PFC: active, Type of connection: fixed, Connectors: 1x 20/24-Pin, 1x 4/8-Pin ATX12V, 4x 6/8-Pin PCIe, 8x SATA, 2x IDE, 1x Floppy, Quantity of 12V-Rails: 1, +3.3V 20A, +5V 20A, +12V 45A, +5Vsb 3.0A, Average efficiency: 85% (Manufacturer), Form factor ATX PS/2, Dimensions (WxHxD) 150x86x140mm
HYPER K series comes ranging from 500W, 600W to 700W for your choice. Enthusiasts of Gamer and hardware, you won't miss HYPER series this time, the high stable performance but affordable price will be your BEST choice.
HYPER K series comes with the +12 single rail design and the SATA array cable, optimized the airflow in case, no-hassle with case side panel. Also, 120mm long lasting fan provides superior cooling, noise <19dBA at 50% loading. Multiple PCI-Express 6+2 pin connectors equipped also 8 units of SATA cable provided.
Complies with ATX 12V v2.4 & EPS 12V v2.92
Meets 85% Efficiency
Active PFC, Power Factor ≧ 99%
+12V Single Rail Design
PCI-Express 6+2 Pin Graphic Card Connectors
SATA Array Cable
120mm Quiet Fan
Complete Protections: OCP, OVP, SCP
Meet ErP/EuP 2013 Standard
Latest Intel Platform Ready
Multiple Safety Approvals
As we get requests concerning the proper sizes of power supplies very often, we want to give you some information here, so that you can get an idea of this topic:
SAMSUNG SSD 981, 512B, M.2, Solid State Module, Form Factor M.2 2280, M.2 / M-Key Interface (PCIe 3.0 x4), Read 3000MB/s, Write 1800MB/s, Read / Write IOPS 4K 270k / 420k, 3D-NAND TLC memory modules, Samsung, 64-layer (V-NAND v4), reliability forecast 1.5 million hours, Samsung Phoenix (S4LR020) controller, 8 channels, NVMe 1.2a protocol, 256bit AES, TCG Opal 2.0 privacy features, Power consumption 5.9W (operation), 0.03W (no load), special features L1.2 Low power standby.
With the 981 SSD series Samsung once again breaks all previous speed records and consolidates its place as the undisputed leader in the field of flash-based solid state drives. The reason for this is the technical superiority of the Samsung SSDs, especially this Samsung 981 in M.2 format with 512 GB capacity, stacked with MLC memory cells with several layers - called V-NAND. It has a very fast PCI Express 3.0 connection with 4 lanes and support for the state-of-the-art NVM Express protocol.
The new Samsung "Phoenix" controller of this hyper-fast drive supports four PCI Express lanes of the standard 3.0, which make a theoretical maximum of about 3,900 MB/s possible! With the built-in Samsung 3-bit MLC V-NAND, the 256 GB variant of the Samsung 981 achieves tremendous 3,000 MB/s reading and 1,800 MB/s writing-, as well as fantastic IOPS values of 270,000 in 4KB read or 420,000 in 4KB write. The modern "Phoenix" controller chip also ensures less waste heat, which does not lead to a performance throttling due to high temperatures.
TOSHIBA Harddisk 1TB, SATA 6Gb/s, Form factor: 3.5" • Drive: 7200rpm • Cache: 64MB • Power consumption: 6.4W (working), 2.2W (idle) • Volume: 26dB(A) (working), 25dB(A) (idle) • Specials: 4KB Sectors with Emulation.
The DT Desktop hard disk drive series provides 1TB capacity and features an innovative technology to deliver a greater level of power efficiency and quiet operation for energy-conscious, environmentally-friendly computers. With low power, high capacity and cool operation, these 3.5-inch (8.9 cm) drives offer a rotation speed of up to 5940 rpm and an interface transfer rate of 6 Gb/s. In addition, the DT Series uses Advanced Format technology to provide maximum error detection and more efficient use of the storage surface area.
No optical disc drive in the system!
PS/2 Combo Port
USB 3.2 Gen 2 10Gbps (Type-A)
HD Audio Connectors
USB 3.2 Gen 2x2 20Gbps (Type-C)
USB 3.2 Gen 1 5Gbps (Type-A)
Wi-Fi / Bluetooth
Optical S/PDIF OUT
Integrated WLAN. For more information click "Motherboard" or "Interfaces" !
The ultimate pleasure for your ears thanks to Creative Sound Blaster Cinema.
MSI, the world's leader in motherboards and graphics cards has chosen Creative Sound Blaster Cinema audio technology for its new motherboard lineup. Sound Blaster is the leading brand in PC gaming audio and MSI is excited about the prospect of providing class-leading audio technology with its motherboards. Thanks to the Sound Blaster Cinema suite of audio technologies, gamers can enjoy upgraded surround sound through their stereo headphones, enhanced gaming sound effects and Smart Volume control for long gaming sessions.
When using Sound Blaster Cinema, gamers will be able to hear their opponents more clearly and easily while enjoying the competitive advantage of accurate positional audio to reveal the precise location of their opponents.
Sound Blaster Cinema
Armed with the technology of the biggest name in PC gaming audio, gamers can leverage Sound Blaster Cinema to get the best sound enhancements for today's games powered by Sound Blaster SBX Pro Studio technology. Each of the five technologies of SBX Pro Studio is focused on delivering a more immersive gaming experience:
-SBX Bass - SBX Bass technology dramatically improves the sound experience by expanding the low frequency tones
-SBX Crystalizer - Ensures that every audio detail is heard by restoring the "highs" and "lows" that are compromised with audio compression
-SBX Dialog Plus - SBX Dialog Plus intelligently enhances voices in games and moves for dramatically clearer dialog
-SBX Surround - Goes beyond 7.1 surround sound creating unprecedented levels of audio realism including stunning surround effects that produce virtual speakers around, above and below you
-SBX Smart Volume - Address the problem of abrupt volume level changes in games by intelligently applying gain and attenuation to deliver consistent volume levels
Microsoft Windows 10 Professional 64Bit, pre-installed with all necessary device drivers. Switch on and get started!
The launch of Windows 10 and the associated developments are among the most important market launches in Microsoft's corporate history. Windows 10 not only brings a new version of the operating system onto the market, Windows 10 enables a new platform generation:
"We want to ensure that we offer developers the largest and most vibrant user base for their applications," said Satya Nadella in his opening keynote at BUILD 2015 in San Francisco. Windows 10 is now available in 190 countries and 111 languages.
The browser is really new in Windows 10: Edge replaces Internet Explorer. The new browser doesn't just have the cooler name. It is also much faster. In almost all browser benchmarks, Edge depends on IE 11 from Windows 8.1. It can almost double its pace in Mozilla's Kraken benchmark. It looks the same in Google's Octane 2.0 test. Its pace remains roughly the same in the Sunspider test and the Peacekeeper benchmark. Conclusion: When it comes to the browser speed, Windows 10 with Edge catches up a lot. In Kraken and Octane, Edge overtakes the competition, in the Sunspider he stays ahead. The old conditions are only preserved in the Peacekeeper test.
Microsoft already shortened the start times of Windows extremely with Windows 8. If the computer is switched off using "Shut down", it does not switch itself off, but only goes into hibernation - from which it can wake up more quickly. Even with a real Katlstart or restart, Windows 8.1 is slightly slower: However, over time, Windows remembers the files that it needs for the start: The start time is shortened with repeated starts. After ten starts, the two operating systems were almost on par with 20 seconds (Windows 10) and 22 seconds (Windows 8.1).
Windows is actually getting faster and faster the older it gets: For most components, manufacturers are releasing ever more up-to-date drivers that accelerate the hardware. Windows feels like it is getting slower and slower: This is mostly due to the fact that the autostart folder is filling up with more and more entries, more and more tools are running in the background and more and more programs that are no longer used are littering the memory. The performance tests show hardly any difference between Windows 8.1 and Windows 10. Sometimes one system is faster, sometimes the other. But all the results are so closely related - with less than three percent difference - that no difference is noticeable in practice. This also applies to tests such as Cinebench R15, which primarily check the processor performance. Even if we repeated the tests several times, nothing changed: When saving and buffering frequently used files, nothing seems to have changed between Windows 8.1 and 10. Conclusion: When it comes to hardware performance, Windows 10 is as fast as Windows 8.1 - or vice versa. So that Windows 10 stays fast, the same rules apply as always with Windows: Install the latest drivers and keep the system clean.
Windows 10 comes with the new Direct X12 3D interface. DX12 is designed to allow game programmers to use the capabilities of the GPU more efficiently. Computers with less powerful graphics cards can also benefit from this and display graphically complex games more smoothly. At the moment, the potential of DX12 can only be demonstrated using synthetic benchmarks such as the API overhead test. Conclusion: Windows 10 has the potential to accelerate games on weaker systems thanks to the DX12. But the concrete results will only show games that use DX12. The first should appear at the end of the year.
Windows 10 lays a good foundation: the hardware manufacturers have to use this to tease out a performance plus with improved drivers. Or in the case of Direct X12 game programmers who use the capabilities of the new interface in games.
HI-TECH anti-cucumber guarantee (already included in full when purchasing a HI-TECH PC and / or notebook)
a) Complete assembling of the PC system or notebook including serial number management
b) Optimization of the cabling between the individual PC components for the purpose of optimal air flow in the system
c) Optimization and performance enhancement of various hardware components (GraKa / CPU etc.)
d) Installation of the latest BIOS updates (motherboard, GraKa)
e) Complete configuration of the BIOS settings to provide the maximum performance and reliability of the PC system + storage of the settings in order to be able to reload them later (e.g. after changing the BIOS battery)
f) free hotline
g) 24-hour long-term test for quality control of the PC components
Enjoy a Breathtaking Gaming Experience with the Systems of HI-TECH!
Our perfectly configured high performance systems offer you the power that you need to win against all your opponents. Real graphics and extreme performance lead you into new dimensions of gaming. Independent journalists attest: our PCs and notebooks are a "masterpiece" (Ingame.de) and the "antithesis of the iMac" (Profil.at)
All information are provided by the manufacturer. Product images shown above may present a possible scenario and represents no liability or responsibility for incorrect or omitted entries and pictures.
i love it
I recommend this to any gamer willing to pay for top of the line game graphics in Ultra.
Was a little dissapointed in the lack of LED light effects missing on the cabinet :oP